band saw

  • Facial Tissue 2 Line Log Saw

    1.Adopt German TKM imported large round knife, the blade is durable 2. The feed conveyor is controlled by a servo motor, which can quickly track the material and increase efficiency 3.The angle of the grinding wheel can be adjusted, and the customer can adjust the angle to ensure that the blade angle is symmetrical, and the paper is not cut obliquely and fluffed 4.Convenient adjustment and quick replacement specifications 5.Equipped with the function of removing the paper head and tail, the paper falling time is 1s, if you do not need to remove the paper head and tail, you can turn off the function on the screen. 6.Stable speed 120 cuts / min (depending on different paper lengths)

    Email Details
  • Facial Tissue 1 Line Log Saw

    1.The dics blade structure of the machine adopts a side-cut fixed non-adjustable structure without moving arm structure. Therefore, the dics blade structure runs smoothly and stably. The conveyor part uses a synchronous belt structure. The flat belt structure is canceled to ensure the accuracy of paper feeding. The paper will not slip. The stable speed of the whole machine can reach 150-180 cuts / minute (depending on different paper lengths and different cutting modes). 2.The machine sets three modes, cutting head and tail mode, cutting head mode and non-cutting head and tail mode, which can meet the requirements of small and medium-sized manufacturers. The parameter setting is simple, customers only need to select the suitable cutting mode , and then in the corresponding mode The paper length specification can be set below, and there are few setting parameters, which is convenient and easy to understand. 3.The blade-grinding structure is simple and stable. Customers only need to set the grinding interval and grinding wheel feeding time on the touch screen according to the quality of the paper. 4.All-round safety protection of the whole machine, each door is equipped with a safety switch, and there is an iron mesh at the bottom of the plexiglass to prevent the blade from flying out. 5.The dics blade is imported from German brand TKM, the blade is durable, and other key moving parts are made of high-quality imported bearings. 6.Customers can choose to remove waste paper in the machine or blow out paper out of the machine according to their own requirements. 7.The built-in rack of the electric box can greatly save the space. The pneumatic adjustments are all set on the outer cover of the rack. The adjustment is convenient be done. There is no need to stop the machine to open the safety door to enter the rack,which can ensure the safety of personnel.

    Email Details
  • Toilet Roll/Kitchen Towel Log Saw

    1.Stable production speed: 120 cuts/min; 2.Adopt independent servo motor drive, and PLC control system; 3.High precision positioning,with length tolerance ±1 mm; 4.Molded clamping unit, reliable and easy to assemble; 5.Reliable and stable servo drive high precision trimming system (applicable to 3L/4L);

    Email Details
  • JRT/AFH Log Saw

    JRT75 Production speed with 1000 mm blade diameter60 cuts/min Max. log diameter Φ300 mm Min. log diameter Φ180 mm Min.cutting length90 mm Max.cutting length280 mm Saw in-feedSingle in-feed Max. log length3250 mm *Other specifications are available to your requirement.

    Email Details
  • FC220-1L Facial Tissue Log Saw

    1.The dics blade structure of the machine adopts a side-cut fixed non-adjustable structure without moving arm structure. Therefore, the dics blade structure runs smoothly and stably. The conveyor part uses a synchronous belt structure. The flat belt structure is canceled to ensure the accuracy of paper feeding. The paper will not slip. The stable speed of the whole machine can reach 150-200 cuts / minute (depending on different paper lengths and different cutting modes). 2.The machine sets three modes, cutting head and tail mode, cutting head mode and non-cutting head and tail mode, which can meet the requirements of small and medium-sized manufacturers. The parameter setting is simple, customers only need to select the suitable cutting mode , and then in the corresponding mode The paper length specification can be set below, and there are few setting parameters, which is convenient and easy to understand. 3.The blade-grinding structure is simple and stable. Customers only need to set the grinding interval and grinding wheel feeding time on the touch screen according to the quality of the paper. 4.All-round safety protection of the whole machine, each door is equipped with a safety switch, and there is an iron mesh at the bottom of the plexiglass to prevent the blade from flying out. 5.The dics blade is imported from German brand TKM, the blade is durable, and other key moving parts are made of high-quality imported bearings. 6.Customers can choose to remove waste paper in the machine or blow out paper out of the machine according to their own requirements. 7.The built-in rack of the electric box can greatly save the space. The pneumatic adjustments are all set on the outer cover of the rack. The adjustment is convenient be done. There is no need to stop the machine to open the safety door to enter the rack,which can ensure the safety of personnel.

    Email Details
Get the latest price? We'll respond as soon as possible(within 12 hours)

Privacy policy